For screen reader problems with this website, please call314-956-58613 1 4 9 5 6 5 8 6 1Standard carrier rates apply to texts.
The front panel provides a separate volume control for each speaker pair, allowing you to adjust the volume in each room from one convenient location.
With two amplifier inputs, the SDB-2.1 allows you to choose a separate program in each room. Each zone also has an on/off switch, which allows you to keep the volume control at a set level while turning the speakers on or off.
The SDB-2.1 uses high-quality impedance-matching autoformers to maintain a safe operating load at the amplifier while distributing maximum power throughout your system. Designed for use with either 4- or 8-ohm speakers, the SDB-2.1 is equipped with internal jumpers to select the degree of impedance matching based on the impedance of your speakers and your amplifier's impedance requirements.
|Shipping Dimensions||10.0" (W) x 4.8" (H) x 9.7" (D), (25.4 x 12.1 x 24.5 cm)|
|Shipping Weight||4.8 lbs (2.2 kg)|
|Connector(s)||Detachable 4-pole color-coded snap connectors|
|Impedance Matching Type||Autoformer|
|Max Wire Size||14 AWG (1.9 mm)|
|Power Handling||100 watts RMS continuous per channell|
|Speaker Impedance||4 ohms|
|Volume Control||12 steps; total attenuation 42 dB|
|Zone Audio Controls||Volume knob, on/off, Amplifier A/B switch|
|Connector Type||Detachable 4-Pole Color-Coded Snap|